Replacement Transmission Drive Belt GX20006 (A87) for . This belt is NOT OEM belt. The OEM number is just for your help in looking for the belt you need!
1/2×89″ OD??Outside dimension??. You can find the inside circumference by subtracting 2″ from the outside.
NOTE: There are many different belts for ! Please make sure this is the right one for your rider! Please check your OEM# and belt size before ordering. The Model number is usually under the seat of your mower.
Fit L110 L118 L120 L236 L130
NOTE: Wear work gloves to protect your hands when installing this part.
This product does not include any warranty from the manufacturer.
These belts can be different colors: Black, Blue, Gray, Brown etc.
Returns are accepted 30 days after receipt. All belts must be returned in NEW UNUSED condition. We cannot accept belts that show any sign of use or installation. We cannot accept belts with grease or dirt on them they must be in resalable condition.
PLEASE NOTE:
To ensure you are ordering the correct belt for your mower.
Please reference your OEM part number when selecting the belt for your mower. Belt OEM (Original Equipment Manufacturer) part numbers will be listed in your users manual or referenced on the OEM sticker that is on your mower.
For riding mowers, the OEM sticker can usually be found under the hood or seat.
Its always highly recommended to order based off of your OEM part number. Also you can measure the outside circumference of your existing belt to make sure the dimensions match the belt you are ordering.
All belts are determined by their Outside circumference ONLY. If your belt has snapped, measure the overall length of the belt and that calculation will be the same as your outside circumference measurement.
The factory OEM belt that fit your machine the day it came off the production line, may not be exactly the same fit years later after hundreds of hours of use. That is why many OEM’s incorporate adjustment mechanisms on the pulley system.
Pulley adjustments range from idler pulleys where you can adjust the hex nuts to specific brackets that are adjustable.
You can read about your specific pulley adjustment type in your users manual