For Separating the Ball Joint From the Spindle Support Arm on Domestic and Import Front Wheel Drive Vehicles

It works on most cars and light trucks

Heat Treated Drop Forged, steel body and bolt for long rough usage

Spread ball joints easily from the spindle support arm.

Fork opening:19mm
How to uses
Slip the forked end between the boot and metal attachment point, be sure the pivot finger is squarely on the threaded end
Tightening the bolt until you have a good amount of resistance;
Tap the attachment point and or the finger with a hammer and tighten some more and tap again;
When the stud comes loose, it will be all at once as the tool falls free and you will hear a ??pop??
Features
For Separating the Ball Joint From the Spindle Support Arm on Domestic and Import Front Wheel Drive Vehicles
It works on most cars and light trucks
Heat Treated Drop Forged, steel body and bolt for long rough usage
Spread ball joints easily from the spindle support arm.
Fork opening:19mm
Application
It has a 9/10inches adjustable height and can be adjusted to 2 sizes for wider working areas and to accommodate various sizes and vehicles. Remover Tool for Separating Arms, Tie Rods, and Ball Joints on Cars, Trucks, ATPs is designed specifically for quick and easy separation of a vehicle??s ball joint from the spindle support arm.Versatile: Universal; For use on both American domestic and European imported/foreign vehicles; For cars, trucks, and even ATPs maximum opening capacity. It will accept a inch socket or wrench.