CUPPINI standard mirror left, round, 110 mm, left, round, 110 mm, chrome, for Vespa all modelsclassic bar length: 160mm, thread: M8 – for lower handlebar fusion mounting, without mirror plates If you ride on the right side of the road by hand (America, Canada, Germany, Austria, France, Italy, etc.), the mirror must be on the left side, then you need to order an L mirror. In a left-hand drive country (England, Ireland, Australia, etc.) ), then youll need a mirror R. L means R left hand means right hand LR means both left and right hand. Good to know: Mirror legislation on older vehicles which do not have an EU registration, requires a minimum reflection surface of 60cm (just over 9in.) on each of their mirrors. A European approval emblem is not absolutely necessary. Current scooter models are all registered under European Union legislation. The mirrors that are attached to them must have the EU approval marking. Mirrors that have less than a 60cm reflection zone or do not have the EU approval marking are not intended for (legal) use on the road. The minimum number of mirrors required depends on the first day of registration before 01/01/1990 1 right mirror from 01/01/1990 max. speed under 100 km/h 1 left mirror from 01.01.1990 max. speeds of over 100 km/h and mirror each side * “Registered according to European Union legislation” are vehicles from 01.10.2005. Check the certificate of registration for entry into the EU (digit K).