MITSUBISHI MONTERO V6 3.5L 2001-2002
Mitsubishi 3.5L 6G74 motor
OE Number:
MD357267/842-12310
PRODUCT INFORMATION:
O-Rings Included: Yes, preinstalled
Orifice Type: 4 Holes Disc
Material: Metal, Plastic
Voltage: DC 12V
Pin Number: 2 Pins
PERFORMANCE:
Direct replacement of your old injector and no modification needed.
The fuel injector comes with durable effective rubber O-Ring that can seal fuel vapors in and keep them from leaking.
High efficient fuel sprays and High Impedance Coil for good performance.
The high impedance fuel injector has been tested and exactly matches the internal coil resistance and fuel flow rate of OEM fuel injector.
Professional installation is highly recommended. Fuel injectors directly affect the air-fuel ratio of the engine and new fuel injectors require a new or updated tune. We also recommend that you inspect the other components of your engine prior to installation.
INSTALLATION:
Step 1. Make sure the engine is cool down. Disconnect the battery.
Step 2. Remove the bolts and brackets from the fuel rail.
Step 3. Disconnect the plug on each injector.
Step 4. Lift the fuel rail and remove the injector from the fuel rail.
Step 5. Press the new injector into the rail. Reattach the fuel rail and put the injectors in their respective holes.
Step 6. Bolt down fuel rail. Reattach fuel line. Plug in injector connectors. Reconnect battery.
Step 7. Double check for fuel leaks before and after starting the engine.