WE ARE HERE TO HELP – PLEASE CONTACT US IF YOU HAVE ANY QUESTIONS!
Part Description
2015 Polaris Sportsman 570 #2 Primary Drive Clutch Assy 1323167 14 15 16 17
This part came off a 2015 Polaris Sportsman 570. It may also fit many other years and models of Polaris ATVs & UTVs. If you have questions on fitment, please ask BEFORE you purchase.
*All parts are shipped exactly as they are pictured unless otherwise noted in description.
*All parts are inspected and deemed usable unless otherwise noted in description.
*Parts may require some cleaning and adjustments for proper installation.
*Engine parts should be properly cleaned and lubricated prior to assembly.
*ALL PARTS SHOULD BE INSTALLED BY AN EXPERIENCED MECHANIC – (We will not be held responsible for part failure due to poor installation)
PART FITMENT
You, “the buyer”, are responsible for doing all the research prior to buying this part. If you are not sure that it will fit your vehicle, please take the time to do the research prior to buying the item. We will try to answer fitment questions to the best of our knowledge and resources.
USED PARTS
The dictionary defines the word “used” as follows: “Not New, Previously Owned”. With that being said, this is a “used” part. I will always do my best to make sure the parts that I sell are in good usable condition. I test vehicles before I tear them down. I also inspect each part before taking pictures. I have no interest in selling you a part that you can’t use, but you have to keep in mind this is a used part and may need to be cleaned or serviced in some way prior to re-installation. I also sell new parts but they are much more expensive.
*Bearings, Bushings, Gaskets, Seals, Clutch Plates, Sprockets, Pistons, Rings, and Brake Pads are all considered “wear parts” and cannot be guaranteed unless specifically stated in the description that they are good.
PLEASE LOOK AT EVERY PICTURE CLOSELY.
ENGINE/MOTOR & CARBURETOR PARTS
All engine parts have been drained of oil and fluids. However, there may be residual fluid in, on, or around the part(s).
YOU or YOUR MECHANIC
are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest using new gaskets and seals for engine reassembly as well as following the ??Factory/OEM Service Manual?? guidelines for proper assembly procedures and torque values for all fasteners. This and all engine parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).
All Carburetor/Intake parts have been drained of fuel. Sometimes these parts sit on a shelf for several weeks/months prior to selling them.
YOU or YOUR MECHANIC
are solely responsible for making sure the part(s) are properly cleaned, lubricated, and installed by a professional mechanic. We highly suggest servicing carburetors and throttle bodies following the ??Factory/OEM Service Manual?? guidelines for proper assembly procedures and torque values for all fasteners. This and all carburetor/intake parts that we sell are deemed usable by Factory/OEM standards and have come off a good running engine (UNLESS NOTED IN THE DESCRIPTION OF THE LISTING).
ATTENTION: FAILURE TO FOLLOW THE ABOVE PROCEDURES AND GUIDELINES MAY RESULT IN CATASTROPHIC ENGINE FAILURE ?C AND/OR PREMATURE ENGINE WEAR. Therefore, Benny??s Powerports LLC and its employees will not be held responsible for any and all failures associated with the use of these engine parts.