isparts

4515 Starter Starter Motor Compatible with 2002 Arctic Cat 375 2003-2008 2010-2011 2014 Arctic Cat 400 2010 KYMCO Maxxer 375 2009-2013 KYMCO MXU 375 2002-2007 for Suzuki Eiger 400

4515 Starter Starter Motor Compatible with 2002 Arctic Cat 375 2003-2008 2010-2011 2014 Arctic Cat 400 2010 KYMCO Maxxer 375 2009-2013 KYMCO MXU 375 2002-2007 for Suzuki Eiger 400

SKU QDMD.06058 3313-719 3545-016 31100-38F00 495775 795775 18809N ARCTCO 3313-719 3545-016 18809N Category Tag

4515 Starter Starter Motor Compatible with 2002 Arctic Cat 375 2003-2008 2010-2011 2014 Arctic Cat 400 2010 KYMCO Maxxer 375 2009-2013 KYMCO MXU 375 2002-2007 for Suzuki Eiger 400

Post date

Description

Application- 2002 Arctic Cat 375 2003-2008 2010-2011 2014 Arctic Cat 400 2010 KYMCO Maxxer 375 2009-2013 KYMCO MXU 375 2002-2007 for Suzuki Eiger 400 2008-2010 for Suzuki King Quad 400
Interchange Part Number-3313-719, 3545-016, 31100-38F00, 495775, 795775 18809N ARCTCO 3313-719, 3545-016 SMU0297 J & N 410-54068 KYMCO 31210-PWB1-900 LESTER 18809, 18840 MARSHALLS 4515 for Suzuki 31100-38F00 TUCKER ROCKY 49-5775
Starter pafor Rameters-12 Volt, CW, 10-Spline Shaft; Mitsuba PMDD; 100% New; Replaces – Arctco 3545-016, Arctic Cat 3313-719, 3545-016, Kymco 31210-PWB1-900, Mitsuba SM-14241, for Suzuki 31100-38F00
Wariness-The starter introduces 344~400Ah of electricity from the battery during the start of the engine. Therefore, in order to prevent the battery from overcurrent or damage, the starting time should not exceed 5s. In winter, it is prone to start-up difficulties. The multiple starting time should not be too long, and appropriate intervals should be left in each starting.
Buyer Notice: Please use the compatibility chart below to double check if these will work for your carPlease contact us if you have any question.
Product description
Application:
2002 Arctic Cat 375
2003-2008 2010 2011 2014 Arctic Cat 400
2010 KYMCO Maxxer 375
2009-2013 KYMCO MXU 375
2002-2007 for Suzuki Eiger 400
2008-2010 for Suzuki King Quad 400
The starter often has faults and phenomena that cannot be rotated or turned slowly. In this case, the following aspects should be checked:
1. The battery has no electricity or weak power, so there is a fault that the starter cannot rotate or rotate slowly.
2. The starter thread is loose or loose, and the switch or adsorption switch is invalid.
3. The brush is worn or the brush surface is not correct, and the spring is weak, so that the rectifier is in poor contact.
4. Short circuit and open circuit of excitation coil or armature coil.
30. the rectifier is fouled, the mica plate protrudes, causing poor contact between the brush and the rectifier.

Contact Us
Please enable JavaScript in your browser to complete this form.
Name