Designed for quick and easy removal and precise installation of suspension linkage and swing arm pivot bearings

Laser etched markings for easy size identification

Eliminates the need for a shop press

Protective blow molded case for easy storage

A must have time saving tool for professional technicians, serious racers and home mechanics
Note: This product has replaced lift kit PLK700R-01. This kit contains alignment cones for 10mm bolts for use with factory tie rod/rod ends and OEM bolts If you have upgraded or plan to upgrade to our Pro Series Tie Rod/Rack End kit, see notes below. 3?? Lift Kit Features: – All hardware needed for successful installation – User-friendly instructions – Bolt-on application; takes approximately 1-2 hours for install – Zinc plated – Front and rear lift – The Steering Stops helps reduce the turn radius and can help prevent breaking an axle. Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision. Notes: 1.5″ spacers are recommended, but a MINIMUM of a 1″ wheel spacer is required on the front if you are running 12″ diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5″ or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering. New Rear High Lifter Outlaw DHT Axles or heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage. High Lifter’s Pro Series Alignment Kit (PSAK-1) is REQUIREDif you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have updgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2″ Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger.
#productDescription {
color: #333333;
word-wrap: break-word;
font-size: small;
line-height: initial;
margin: 0.5em 0px 0em 25px;
}
#productDescription_feature_div > h2.default {
color: #CC6600;
font-size: medium;
margin: 0 0 0.25em;
}
#productDescription_feature_div > h2.books {
color:#333 !important;
font-size:21px !important;
line-height: 1.3;
padding-bottom: 4px;
font-weight: normal;
margin: 0px;
}
#productDescription_feature_div > h2.softlines {
color:#333 !important;
font-size:21px !important;
line-height: 1.3;
padding-bottom: 4px;
font-weight: bold;
margin: 0px;
}
#productDescription > p, #productDescription > div, #productDescription > table {
margin: 0 0 1em 0;
}
#productDescription p {
margin: 0em 0 1em 1em;
}
#productDescription h3 {
font-weight: normal;
color: #333333;
font-size: 1.23em;
clear: left;
margin: 0.75em 0px 0.375em -15px;
}
#productDescription table {
border-collapse: inherit !important;
margin-bottom: 0;
}
#productDescription table img {
max-width: inherit !important;
}
#productDescription table td {
font-size: small;
vertical-align: inherit !important;
}
#productDescription ul li {
margin: 0 0 0 20px;
}
#productDescription ul li ul {
list-style-type: disc !important;
margin-left: 20px !important;
}
#productDescription ul ul li {
list-style-type: disc !important;
margin-left: 20px !important;
}
#productDescription > ul ul li {
list-style-type: disc !important;
}
#productDescription ul li ul li {
margin: 0 0 0 20px;
}
#productDescription .aplus p {
margin: 0 0 1em 0;
}
#productDescription small {
font-size: smaller;
}
#productDescription.prodDescWidth {
max-width: 1000px
}
P.when(‘jQuery’).execute(function($){
$(“#productDescription table”).each(function() {
var width = $(this).attr(‘width’);
if (width) width += ‘px’;
else width = ‘auto’;
$(this).css(‘width’, width);
var padding = $(this).attr(‘cellpadding’);
if (padding) padding += ‘px’;
else padding = ‘0px’;
$(this).css(‘padding’, padding);
});
});
#productDescription h3 {
margin: 0.75em 0px 0.375em -1px;
},
Note: This product has replaced lift kit PLK700R-01. This kit contains alignment cones for 10mm bolts for use with factory tie rod/rod ends and OEM bolts If you have upgraded or plan to upgrade to our Pro Series Tie Rod/Rack End kit, see notes below. 3?? Lift Kit Features: – All hardware needed for successful installation – User-friendly instructions – Bolt-on application; takes approximately 1-2 hours for install – Zinc plated – Front and rear lift – The Steering Stops helps reduce the turn radius and can help prevent breaking an axle. Our stated tire fitment guide is a general fitment and is in no way guaranteed. Tires and lifts vary by manufacture and tire fitment can be affected by other modifications. Always verify your brand of tires, lift, and other modifications prior to making a buying decision. Notes: 1.5″ spacers are recommended, but a MINIMUM of a 1″ wheel spacer is required on the front if you are running 12″ diameter factory or aftermarket wheels for the wheel to clear the tie rod with the alignment cones installed. If you are running wide tires a 1.5″ or wider spacer may be required depending on the width of the tire for tire to shock clearance at full lock steering. New Rear High Lifter Outlaw DHT Axles or heavy duty after market axles are recommended for the 2011-2014 Ranger models before installing ANY brand of lift kit. The 2011-2014 model rangers have lighter duty rear axles than previous year models and are more prone to breakage. High Lifter’s Pro Series Alignment Kit (PSAK-1) is REQUIREDif you own or are buying PLK800R-50 or ANY brand of Ranger lift kit and have updgraded or are upgrading to the Pro Series Ranger Tie Rod/Rack End Kit. This kit also upgrades from the OEM 10mm bolt to a 1/2″ Gr. 8 bolt to match the heavy duty heim joint in our Tie Rod/Rack End Kit. The alignment kit comes with 2 alignment cones and all hardware required to upgrade both sides of the Ranger.
#productDescription {
color: #333333;
word-wrap: break-word;
font-size: small;
line-height: initial;
margin: 0.5em 0px 0em 25px;
}
#productDescription_feature_div > h2.default {
color: #CC6600;
font-size: medium;
margin: 0 0 0.25em;
}
#productDescription_feature_div > h2.books {
color:#333 !important;
font-size:21px !important;
line-height: 1.3;
padding-bottom: 4px;
font-weight: normal;
margin: 0px;
}
#productDescription_feature_div > h2.softlines {
color:#333 !important;
font-size:21px !important;
line-height: 1.3;
padding-bottom: 4px;
font-weight: bold;
margin: 0px;
}
#productDescription > p, #productDescription > div, #productDescription > table {
margin: 0 0 1em 0;
}
#productDescription p {
margin: 0em 0 1em 1em;
}
#productDescription h3 {
font-weight: normal;
color: #333333;
font-size: 1.23em;
clear: left;
margin: 0.75em 0px 0.375em -15px;
}
#productDescription table {
border-collapse: inherit !important;
margin-bottom: 0;
}
#productDescription table img {
max-width: inherit !important;
}
#productDescription table td {
font-size: small;
vertical-align: inherit !important;
}
#productDescription ul li {
margin: 0 0 0 20px;
}
#productDescription ul li ul {
list-style-type: disc !important;
margin-left: 20px !important;
}
#productDescription ul ul li {
list-style-type: disc !important;
margin-left: 20px !important;
}
#productDescription > ul ul li {
list-style-type: disc !important;
}
#productDescription ul li ul li {
margin: 0 0 0 20px;
}
#productDescription .aplus p {
margin: 0 0 1em 0;
}
#productDescription small {
font-size: smaller;
}
#productDescription.prodDescWidth {
max-width: 1000px
}
P.when(‘jQuery’).execute(function($){
$(“#productDescription table”).each(function() {
var width = $(this).attr(‘width’);
if (width) width += ‘px’;